Padmount Metering
Our padmount and pole‑mount metering enclosures are self‑supporting designs, featuring a dedicated metering compartment with a hinged, removable panel for easy access.
These metal enclosures are built for 5 kV and 25 kV service with 200A–600A ratings. They’re suitable for both utility and solar field installations, providing reliable performance across a wide range of applications.
_mp4.jpg)
Standard Features
-
Enclosure: 12 gauge cold roll steel
-
Base: 3" or 4" channel iron base is hot‑dipped galvanized
-
Roof: Cross‑kinked for added strength and to shed rain/snow
-
All copper busbar (bare, silver, or tin)
-
MIG welded throughout
-
Meets ANSI C57.12.28 and Western Underground Committee 2.13
-
Stainless steel hinges
-
Doors provided with penta head/padlockable handle with vandal‑resistant three‑point latching
-
Door stop locks hold the door in the open position
-
Hold‑down cleats
-
Bold, clear cautionary labels
-
CTs and PTs are isolated by NEMA GPO‑3 barriers
-
Enclosure doors have lift‑off capability in the open position only
-
Enclosure has 3 millimeters of universal epoxy primer and 3 millimeters of epoxy siloxane finish
-
Seams are sealed before applying the final finish to prevent water infiltration
Optional Features
-
Available as dead‑front or live‑front design
-
CTs and PTs factory-installed or on-site per customer preference
-
Customer-approved fuse i.e., Cooper, S&C, etc.
-
NX fuse or equal factory‑installed mounts available
-
Flex cable available
-
Removable lifting eyes
-
PVC conduit and fittings for low‑voltage wiring
-
Pole-mounted enclosure can be supplied with brackets for wall mounting
-
Factory‑installed leveling device
-
Lifting provisions for PTs / CTs available